Hits
End-Fed Half-Wave Antenna & Tuner
I would like to have the option of using the antenna portable, where a transmission line is just something else to carry and end-feeding is probably the easiest to set-up
post 12 Apr 2026
Antenna End Fed Links →
160 meter end fed
With this length of wire a coil of 11 turns is required, resonating the antenna on 1.950MHz with an SWR of 1.5:1
10 20 40m Endfed antenna
It's has a large bandwidth with a low SWR and has no radials
40m End Fed Half Wave EFHW Antenna
The feed point of the EFHW is in the order of 3000 to 5000 ohms while the 1/2 wave dipole will be closer to 50 ohms in the inverted V configuration
60 Meter End Fed Half Wave Antenna Tuner
Efhw antenna designe
End-fed Half wave or fed random antenna in inverted-L
78
With this length of wire a coil of 11 turns is required, resonating the antenna on 1.950MHz with an SWR of 1.5:1
It's has a large bandwidth with a low SWR and has no radials
The feed point of the EFHW is in the order of 3000 to 5000 ohms while the 1/2 wave dipole will be closer to 50 ohms in the inverted V configuration
End-fed Half wave or fed random antenna in inverted-L
All Spectrum Electronic All Spectrum Electronics Hobby Kits and Electronics Supply
Dxengineering Ham Radio Equipment DX Engineering Ham Radio Equipment & Supplies
BA-Electronics Ba-electronics, a division of products, has added electronic components, test equipment, wire, and supplies to its product offering